Search found 6 matches
- Wed Feb 20, 2019 1:13 am
- Forum: Technical
- Topic: D3 airbag light
- Replies: 3
- Views: 2621
Re: D3 airbag light
Happened on my Sprinter. It was the seat buckle that had a bad connection - maybe the microswitch within. On the Sprinter the seat buckle is connected to the airbag module. The module expects to see 400ohms when buckle is unlatched and 100ohms when latched - guess there is a small circuit of resisto...
- Wed Feb 20, 2019 1:03 am
- Forum: Technical
- Topic: Slow (front) wipers ... who’s the culprit
- Replies: 7
- Views: 4308
Re: Slow (front) wipers ... who’s the culprit
My guess would be the linkage. Had this happen on my Hyundai van, and apparently the bushings was made of aluminium which reacted to steel bolts going through them and expanded. Had it cleaned out and it worked again. Have not heard of that on the disco though...
- Wed Feb 20, 2019 12:56 am
- Forum: Technical
- Topic: iidtool update failed
- Replies: 6
- Views: 3957
Re: iidtool update failed
Shipped it to GAP in Canada. They fixed it. Apparently update of the bootloader had failed and needed a factory visit. The best service!
- Tue Jan 01, 2019 9:48 pm
- Forum: Technical
- Topic: iidtool update failed
- Replies: 6
- Views: 3957
Re: iidtool update failed
Thanks. Shipped it to GAP, hopefully they´ll figure it out.
-k
-k
- Tue Dec 25, 2018 9:24 pm
- Forum: Technical
- Topic: To AGM or not to AGM? That is the question
- Replies: 13
- Views: 7256
Re: To AGM or not to AGM? That is the question
Guess there is always a chance the battery could be a dud. Beyond that, I guess the alternator could be faulty. Mine went some time ago, but my friend commented on a slight flickering of the internal lights half a year before it shorted out. Would be interesting to run a scope over the battery poles...
- Tue Dec 25, 2018 9:14 pm
- Forum: Technical
- Topic: iidtool update failed
- Replies: 6
- Views: 3957
iidtool update failed
Hi. Tried to update firmware on the IIDtool BT. The updater found the tool and started updating. At the end it reported status failed. Now I cannot contact it with the app, there is no blue light on it. The updater software cannot contact it. The update was done using my Macbook, but now the updater...