Page 1 of 1

For Sale - D3/D4 air tank guard

Posted: Sun May 14, 2017 5:03 pm
by JF Lux
Underbody protection for the air tank (not the compressor !). Fits D3 and D4.
Simple to fit - crawl underneath the vehicle, loosen 2 bolts closer securing the airtank at the front end, slide the foot of the guard under the bolts and re-tighten. Remove one bolt securing the airtank at the rear end then screw back on with the guard in place. Simple...even I could do it...

Also works if you have rock/tree sliders in place - definitely known to work with RLD sliders, Prospeed and GNVP (and their copies...) tree sliders.

Reason for sale...? For some reason I bought another one for the D3 forgetting I had this on the D4... :roll:

Available after the weekend of June 10 when it can be brought over to the UK

Price - GBP 30

Re: For Sale - D3/D4 air tank guard

Posted: Sun Apr 01, 2018 9:54 pm
by d3_v8
JF Lux wrote:Underbody protection for the air tank (not the compressor !). Fits D3 and D4.
Simple to fit - crawl underneath the vehicle, loosen 2 bolts closer securing the airtank at the front end, slide the foot of the guard under the bolts and re-tighten. Remove one bolt securing the airtank at the rear end then screw back on with the guard in place. Simple...even I could do it...

Also works if you have rock/tree sliders in place - definitely known to work with RLD sliders, Prospeed and GNVP (and their copies...) tree sliders.

Reason for sale...? For some reason I bought another one for the D3 forgetting I had this on the D4... :roll:

Available after the weekend of June 10 when it can be brought over to the UK

Price - GBP 30
Dibs subject to few photos please?

Sent from my SM-N9500 using Tapatalk


Re: For Sale - D3/D4 air tank guard

Posted: Sun Apr 01, 2018 9:55 pm
by d3_v8
JF Lux wrote:Underbody protection for the air tank (not the compressor !). Fits D3 and D4.
Simple to fit - crawl underneath the vehicle, loosen 2 bolts closer securing the airtank at the front end, slide the foot of the guard under the bolts and re-tighten. Remove one bolt securing the airtank at the rear end then screw back on with the guard in place. Simple...even I could do it...

Also works if you have rock/tree sliders in place - definitely known to work with RLD sliders, Prospeed and GNVP (and their copies...) tree sliders.

Reason for sale...? For some reason I bought another one for the D3 forgetting I had this on the D4... :roll:

Available after the weekend of June 10 when it can be brought over to the UK

Price - GBP 30
Dibs subject to few photos please?

Sent from my SM-N9500 using Tapatalk


Re: For Sale - D3/D4 air tank guard

Posted: Mon Nov 05, 2018 8:59 am
by baz2236
Is this still available if so I will buy it