Hello,
What tyres are on the rims and what sort of life have they got left?
I need a set for a few months use.
Thanks
Wheels, Gap diag, headrests
-
- Forum Contributor
- Posts: 353
- Joined: Tue May 17, 2011 10:15 pm
- Car Details: Discovery 3 HSE 2006
- Location: Newbury, M4 J13
Re: Wheels, Gap diag, headrests
Bonatti Grey 06 HSE
EGRs Blanked, Gearbox Pivot, Diff Breather, Diff & Transfer Oils, Fuel Filter, BAS I/C Hose, Sump Guard
MegaFlush, Secondary G/B Cooler, Door Latches OSF (Warranty Direct) & NSF, Compressor (WD) F/L Wishbones (WD)
EGRs Blanked, Gearbox Pivot, Diff Breather, Diff & Transfer Oils, Fuel Filter, BAS I/C Hose, Sump Guard
MegaFlush, Secondary G/B Cooler, Door Latches OSF (Warranty Direct) & NSF, Compressor (WD) F/L Wishbones (WD)
-
- Forum Contributor
- Posts: 353
- Joined: Tue May 17, 2011 10:15 pm
- Car Details: Discovery 3 HSE 2006
- Location: Newbury, M4 J13
Re: Wheels, Gap diag, headrests
Oh well, no worries
Thanks
Thanks
Bonatti Grey 06 HSE
EGRs Blanked, Gearbox Pivot, Diff Breather, Diff & Transfer Oils, Fuel Filter, BAS I/C Hose, Sump Guard
MegaFlush, Secondary G/B Cooler, Door Latches OSF (Warranty Direct) & NSF, Compressor (WD) F/L Wishbones (WD)
EGRs Blanked, Gearbox Pivot, Diff Breather, Diff & Transfer Oils, Fuel Filter, BAS I/C Hose, Sump Guard
MegaFlush, Secondary G/B Cooler, Door Latches OSF (Warranty Direct) & NSF, Compressor (WD) F/L Wishbones (WD)
-
- Forum Contributor
- Posts: 40
- Joined: Wed Apr 06, 2016 1:15 pm
- Car Details: Discovery 3 2005
- Location: Shropshire, England
-
- Forum Contributor
- Posts: 129
- Joined: Fri Jun 03, 2016 9:02 pm
- Car Details: D3 HSE
- Member Since: 06 Jun 2016
Re: Wheels, Gap diag, headrests
Sorry for delay Mike ive not been on for a while. Send me a pm as I tend to get email notifications.
I will grab some pictures when I am next down the workshop for you in the next few days.
Here is a picture of the faulty diagnostics. It may need an update, may need a repair. I have no idea. Cant see anything but as I got a replacement I never done anything with it. Could be a bargain for someone if you take it to a pcb place to have it looked at, they may find a resistor gone or something else with a cool name in the electronics world (no idea). Never registered it.
I will grab some pictures when I am next down the workshop for you in the next few days.
Here is a picture of the faulty diagnostics. It may need an update, may need a repair. I have no idea. Cant see anything but as I got a replacement I never done anything with it. Could be a bargain for someone if you take it to a pcb place to have it looked at, they may find a resistor gone or something else with a cool name in the electronics world (no idea). Never registered it.